ZE-RCE3804 Rear view camera for Ford Transit

The camera module integrated into the LED brake light allows easy plug & play replacement of the original brake light assembly from the factory.

The camera sensor of the ZE-RCE3804 has a swiveling sensor module for manual adjustment of the desired image capture range. The large diagonal viewing angle of 140° for monitoring the area behind the vehicle enables safe backing and parking.

The CCD sensor used offers high resolution, good light sensitivity and good signal-to-noise ratio. Circularly placed around the sensor are 6 IR LEDs, which, controlled by an LDR light sensor, provide automatic twilight and night illumination.

The ZE-RCE3804 has an internal microphone for additional acoustic monitoring of what is happening behind the vehicle during maneuvering.

The ZE-RCE3804's 10-meter main system cable is equipped with screwed 4-PIN connectors.

The ZE-RCE3804 is compatible with rear camera monitors, 1-DIN and 2-DIN car infotainment devices, moniceivers and naviceivers that have a (RCA) CVBS camera input with additional microphone audio (RCA) input.

Specifications:

• Image Sensor Cam: SHARP RJ2331 CCD Sensor (with AA9050)
• Image Sensor Type: 1/3" / 8.5mm CCD Sensor
• TV System: NTSC / 30 fps
• Viewing Angle: 140° diagonal
• Native sensor SoC pixel resolution: 976 (H) x 494 (V) pixels
• Image relevant pixel resolution: 700 TV lines
• Focal length lens: 2.6 mm
• Frame rate: 30 fields/sec., interlaced
• Signal to Noise Ratio: > 48 dB
• Dynamic Contrast: > 60 dB
• Light Sensitivity: 0 Lux with IR LED On
• Video Output: 1.0 ±0.2 Vp-p, 75 Ω, CVBS
• White balance: Automatic
• Exposure compensation: Automatic
• Gamma correction: 0.45
• Brightness compensation: Automatic
• Synchronization: Automatic
• Power supply: 12 DCV
• Total power consumption (@12 V DC): 80 mA ±10 mA
• Ingress protection rating: IP68
• Operating temperature: -20° C ~ +70° C